1050228

PHOENIX CONTACT Kontrol Ekipmanları

MACX MCR-TC-I - Temperature transducer: converts signals from thermocouples and mV sources into 0/4…20 mA signals. Freely programmable, 3-way electrical isolation, screw connection, SIL.

Bu ürün için fiyat teklifi alın. Rekabetçi fiyatlarımızdan yararlanın.

WhatsApp ile Teklif Al İletişim

Benzer Ürünler

Ürün Kodu: 2941170 DEK-REL- 5/O/1 - Relay terminal block, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage 5 V AC/DC, for assembly on NS 35/7.5, terminal width 6.2 mm, design rotated

PHOENIX CONTACT

Fiyat için teklif isteyin

Ürün Kodu: 1105107 PSR-M-GW-ETH-PI - Gateway for connecting a PSR-M base module to a higher-level controller, EtherNet/IP™, TBUS interface, plug-in Push-in terminal block, TBUS connector included

PHOENIX CONTACT

Fiyat için teklif isteyin

Ürün Kodu: 2967617 PLC-RSC- 12DC/21HC - PLC-INTERFACE, consisting of PLC-BSC.../21 HC basic terminal block with screw connection and plug-in miniature relay for high continuous current, for mounting on DIN rail NS 35/7,5, limiting continuous current up to 10 A, 1 changeover contact, input voltage 12 V DC

PHOENIX CONTACT

Fiyat için teklif isteyin

Ürün Kodu: 2908063 MACX MCR-IDS-I-I - Output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA ... 20 mA signals to a load in the safe area. 3-way electrical isolation, line fault detection (can be switched off via DIP switch), SIL 2 (SC3) in accordance with IEC 61508, screw connection.

PHOENIX CONTACT

Fiyat için teklif isteyin